Ebay Stuff

What is this? ODT has experimented with various methods to achieve the best results in having an over-ride button. This kit allows to over-ride the "computer says no" scenario when you want to run the rear diff lock! It allows for operation in 2WD,...

An EGR Cooler delete kit designed to suit the top mount intercooler 4JJ1 motor. Built to suit the factory Top Mount Intercooler (TMIC) or an aftermarket Front Mount Intercooler (FMIC). This kit comes with a moulded silicone pipe, 3 stainless steel hose clamps and an aluminium...

Pair of Front Upper Ball Joints Suits 4wd Isuzu D-max 2008-2012 4wd  Holden RC Colorado 2008-2012 4wd Holden Rodeo 2003-2008 Brand: Roadsafe Warranty 12 months when fitted correctly.

This Pipe is made with a Flurosilicone liner which makes these oil safe. Silicone can still sweat but the oil will not deteriorate this material. Please note when installing, do NOT use rubber grease or oil to help "slide" the pipe on, rather use...

The All-New Boost Tee by Turbosmart is a facelift on the tried and tested Boost Tee you've come to love. Now featuring a 33% smaller and more ergonomic design, the All-New Boost Tee incorporates all the same functionality that makes it a crowd favourite...

1KD SKS AUS 44mm Vnt Turbo Direct bolt on turbo Direct replacement 1KD Hilux or Prado performance turbo designed for 20-27psi, We see up to 100% power and torque gains with this turbo paired with our plus 30 injectors, turbo comes with full gasket...

Premium 44mm upgade for 4JJ1 engines. This Turbo Bolts directly onto factory manifold of (big actuator turbo) if you don’t have this exhaust manifold we can also supply Performance of this turbo will out perform factory turbo and can make more power and torque...

MRX Hi-Flow Intake Manifold. Intake Manifold from MRX Performance, specially design to increase more air flowing in to the combustion chamber fast and equal in every piston. For the best efficiency.

DPM 1HD-FTE Conrods Our conrods have been designed to handle the extra load of a modified performance engine. They are made from 4340 forged steel from our H beam design making them light and strong. All our DPM conrods come with ARP2000 rod bolts...

Add some bling to your 1KD with a clear timing cover kit!! Replaces OEM timing cover, as a direct bolt on kit. Comes with new bling bolts.

This automatic transmission cooler upgrade significantly reducers transmission oil temperatures.  This kit is most efficient for towing, driving in hot conditions, driving up the beach in sand and/or driving with heavy loads.    The RC/RA7/DMAX Auto Cooler Upgrade comes in either a silver 20MM...

 THUNDER 12 Volt 8 Amp 8 Stage Battery Charger TDR02108 The 12 amp automatic battery charger is a practical water-resistant 8 stage charger, utilising fully automatic computer system control, designed to charge most 12 volt GEL, AGM, Lead Acid and Calcium batteries. With a...

Front Lower Control Arm Ball Joints Suits 4wd Isuzu D-max 2008-2012 4wd  Holden RC Colorado 2008-2012 4wd Holden Rodeo 2003-2008 Brand: Roadsafe Warranty 12 months when fitted correctly.

Premium 44mm Small rear Housing upgade for 1KD engines. This Turbo Bolts directly onto factory manifold. Suits Toyota 3Lt KUN Hilux, Prado and Hiace Performance of this turbo will out perform factory turbo and can make more power and torque when tuned correctly, Highly...

What is this? This modification loom deletes your EGR system. The loom is a fully molded and has a double-shielded construction. No tools are required to install the loom and it takes second to install. It is a simple plug and play design. The...

KEY FEATURES: Plug & play On/off 14 step throttle responses Eco mode (user-defined setting of maximum allowable vehicle speed) Anti-slip mode (reduces engine power for slippery conditions) Anti-theft mode (electronically locks throttle pedal with unique password) Ramble mode 1 year warranty Please specify vehicle...

MRX have partnered with ARP to produce the strongest 4JJ1 direct fit Cylinder Head Bolts on the market. ARP2000 4JJ1 Cylinder Head Bolts, Direct Fit. - Much Less Bolt Stretch. - Higher Clamping Pressure.

DPM 1KD Conrods Our conrods have been designed to handle the extra load of a modified performance engine. They are made from 4340 forged steel from our H beam design making them light and strong. All our DPM conrods come with ARP2000 rod bolts...

DPM Key-rings are quality products cut to perfection and ready to go.

Brand new genuine SKSAUS 44MM Bolt On Turbo upgrade for the 4N15 engine in the Mitsubishi Triton. This is a Factory replacement style turbo, it fits in place of the factory turbo allowing you to fit the standard exhaust and intercooler piping.  Rated for...