-
2WD RC Colorado, Rodeo, Early D-Max Upper Control ArmsVendor: Diesel Performance & Mechanical
- From $126.95
- From $126.95
- Unit price
- per
-
3.2L Ranger/Everest Filter Kit- K-17010Vendor: Diesel Performance & Mechanical****NOTE: Kit Comes with Round Air Filter, For Panel Air Filter Use K-50170Ford Ranger PX1 2011-2015 2.2L P4AT I4 16V DOHCFord Ranger PX2 2015-On 2.2L P4AT I4 16V DOHCFord Ranger PX3 2018-On 2.2L P4AT I4 16V DOHCFord Ranger PX1 PX2 2011-On 3.2L P5AT I5...
- $85.50
- $85.50
- Unit price
- per
-
3PC BRAKE/TYRE KITVendor: SP ToolsFEATURES: Revolutionise your service routine with this professional brake and tyre assessment kit. Designed for precision and efficiency, this kit empowers you to ensure optimal safety and performance for every vehicle. With accurate measurements of brake pad and shoe depths, as well as tyre...
- $159.00
$189.00- $159.00
- Unit price
- per
-
3PC EXTENDED REACH PIN PUNCH SETVendor: Diesel Performance & MechanicalForged from high quality Chrome Vanadium Steel Accurately hardened & tempered 38-45 HRC punches Designed to remove drift pins, roll pins, clevis pins, spring pins, dowel pins & more 16" (400 mm) length provides access into hard to reach areas Sizes Included: 1/4, 5/16...
- $99.00
$125.00- $99.00
- Unit price
- per
-
3PC TERMINAL REMOVER SETVendor: Diesel Performance & MechanicalSet of star terminal tools designed to remove or release terminals from a wide variety of connectors and pin terminals from connector housing without damage Includes 3x star terminal tools designed to remove or release terminals from a wide variety of connectors and...
- $79.00
$97.00- $79.00
- Unit price
- per
-
40mm SKS Australia 1GD Turbo- VNT PERFORMANCE UPGRADE TURBO N80/GUN 2.8Lt HiluxVendor: SKS TurboUp to 230hp Hi-Flow Performance VNT Turbo (Factory Replacement) This Turbo Bolts directly onto factory manifold using original stepper motor Suits Toyota 2.8Lt GUN 2015-2020 N80 Hilux, Prado and Hiace Upgraded with: 40mm Billet front turbine 12.5% larger than factory and capable of producing...
- From $1,999.00
$1,999.00- From $1,999.00
- Unit price
- per
-
448PC KIT TECH SERIES ROLL CAB BLUE HANDLESVendor: SP ToolsIN STORE PICKUP ONLY TOOLS INCLUDED IN THIS TOOL KIT 1/4”Dr SOCKETS & ACCESSORIES 12pt - 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm 12pt - 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2” 45T Ratchet, Flex Handle...
- $2,999.00
$3,999.00- $2,999.00
- Unit price
- per
-
448PC KIT TECH SERIES ROLL CAB GREEN HANDLESVendor: SP ToolsIN STORE PICKUP ONLY TOOLS INCLUDED IN THIS TOOL KIT 1/4”Dr SOCKETS & ACCESSORIES 12pt - 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm 12pt - 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2” 45T Ratchet, Flex Handle...
- $2,999.00
$3,999.00- $2,999.00
- Unit price
- per
-
448PC KIT TECH SERIES ROLL CAB ORANGE HANDLESVendor: SP ToolsIN STORE PICKUP ONLY TOOLS INCLUDED IN THIS TOOL KIT 1/4”Dr SOCKETS & ACCESSORIES 12pt - 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm 12pt - 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2” 45T Ratchet, Flex Handle...
- $2,999.00
$3,999.00- $2,999.00
- Unit price
- per
-
4JJ1 Engine Camshaft Position SensorVendor: Diesel Performance & MechanicalGeniune Cam Angle Sensor or 4JJ1 3.0L diesel
- $184.00
- $184.00
- Unit price
- per
-
4JJ1 Engine Crankshaft Position SensorVendor: Diesel Performance & MechanicalGenuine Crankshaft Angle Sensor or 4JJ1 3.0L diesel
- $169.00
- $169.00
- Unit price
- per
-
4JJ1 Intercooler Hot Pipe UpgradeVendor: Diesel Performance & MechanicalThis Pipe is made with a Flurosilicone liner which makes these oil safe. Silicone can still sweat but the oil will not deteriorate this material. Please note when installing, do NOT use rubber grease or oil to help "slide" the pipe on, rather use...
- $80.00
- $80.00
- Unit price
- per
-
4JJ1 SKS44 - Gated Upgrade TurboVendor: SKS TurboPremium 44mm upgade for 4JJ1 engines. This Turbo Bolts directly onto factory manifold of (big actuator turbo) if you don’t have this exhaust manifold we can also supply Performance of this turbo will out perform factory turbo and can make more power and torque...
- From $1,899.00
$1,899.00- From $1,899.00
- Unit price
- per
-
60W HOT BLADE STICKER REMOVERVendor: SP ToolsFEATURES: 60W Hot Blade Decal Remover Working Time: 30 minutes Max. Temp: 230°C 19 x 39mm (75mm tip length) Note: This tip suits SP32295 - 90w Li-ion Cordless Soldering Iron Kit only
- $49.00
$59.00- $49.00
- Unit price
- per
-
60W PLASTIC CUTTING KNIFEVendor: SP ToolsFEATURES: 60W Hot plastic cutting knife Working Time: 35 minutes Max. Temp: 600°C 90 x 65mm Note: This tip suits SP32295 - 90w Li-ion Cordless Soldering Iron Kit only
- $49.00
$59.00- $49.00
- Unit price
- per
-
6Boost AUDI S2 5CYL RWD Turbo manifoldVendor: Pulsar Turbos Australia6Boost Turbo Manifolds are handmade, Made to order. They are built around a unique "merge collector" design. This means no pipes cross each other and the merge collector directs all gases at the turbine entry. These are made to order by 6Boost and shipped...
- From $1,300.00
- From $1,300.00
- Unit price
- per
-
6Boost FORD 250 CROSSFLOW Turbo manifoldVendor: Pulsar Turbos Australia6Boost Turbo Manifolds are handmade, Made to order. They are built around a unique "merge collector" design. This means no pipes cross each other and the merge collector directs all gases at the turbine entry. These are made to order by 6Boost and shipped...
- From $1,400.00
- From $1,400.00
- Unit price
- per
-
6Boost Ford BA-FG Barra Pro Mod Turbo manifoldVendor: Pulsar Turbos Australia6Boost Turbo Manifolds are handmade, Made to order. They are built around a unique "merge collector" design. This means no pipes cross each other and the merge collector directs all gases at the turbine entry. These are made to order by 6Boost and shipped...
- From $1,500.00
- From $1,500.00
- Unit price
- per
-
6Boost Ford BA-FG Barra Turbo manifoldVendor: Pulsar Turbos Australia6Boost Turbo Manifolds are handmade, Made to order. They are built around a unique "merge collector" design. This means no pipes cross each other and the merge collector directs all gases at the turbine entry. These are made to order by 6Boost and shipped...
- From $1,300.00
- From $1,300.00
- Unit price
- per
-
6Boost Ford EA-AU (SOCH) Turbo manifoldVendor: Pulsar Turbos Australia6Boost Turbo Manifolds are handmade, Made to order. They are built around a unique "merge collector" design. This means no pipes cross each other and the merge collector directs all gases at the turbine entry. These are made to order by 6Boost and shipped...
- From $1,300.00
- From $1,300.00
- Unit price
- per
Recently Viewed Products
- Choosing a selection results in a full page refresh.