All

Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.  Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the...

Roadsafe offers over 800 catalogued Control Arm numbers. It suits over hundreds of known vehicle applications for both upper and lower locations. In many circumstances, a mechanic might replace the bushings in a control arm, however where the arm aperture enlarges or changes shape...

PFI Wheel Bearing Kit Our taper roller bearings are through-hardened,with optimized geometry and surfaces to supporthigh loads and reduce friction, granting highoperation reliability and long-service life Vehicle Fitment

RACEWORKS 52MM ELECTRONIC FUEL LEVEL GAUGE KIT FEATURES & BENEFITS 52mm / 2 Inch diameter. 10 colour LED. 270 degrees Full Sweep. Programmable Warning. Peak Function. Adjustable Brightness. Adjustable Dimmer. Compact Digital Sensors, resulting in no hoses or pressure lines being run into the...

Direction Plus™ Fuel Manager Post-Filter Kit PF612DPK suits Toyota Hilux (1KD-FTV) models, protecting its engine against costly injector failure. This kit fits: Toyota Hilux 1KD-FTV (3.0L 4cyl) 2004 – 2015 PROTECT YOUR ENGINE To ensure that you get the best protection, we recommend to...

Direction Plus™ Fuel Manager Pre-Filter Kit FM601DPK suits Isuzu D-Max and MU-X (4JJ1TCX) models, protecting its engine against costly injector failure. This kit fits: Isuzu D-Max 4JJ1TCX (3.0L 4cyl) 2012-2020 Isuzu MU-X 4JJ1TCX (3.0L 4cyl) 2017-2021 PROTECT YOUR ENGINE It’s easy to think that...

Direction Plus™ Fuel Manager Pre-Filter Kit FM602DPK suits Holden Colorado/Colorado 7/TrailBlazer models, protecting its engine against costly injector failure. Holden Colorado LWH (2.8L 4cyl) 2012-2020 Holden Colorado 7 / TrailBlazer LWH (2.8L 4cyl) 2012-2020 PROTECT YOUR ENGINE It’s easy to think that fuel contamination is something that happens “in the bush” but...

Fuel Water Separator Filter Direction Plus™ Fuel Manager Pre-Filter Kit FM609DPK is designed and engineered in Australia to suit Ford Ranger and Mazda BT-50 models, protecting its engine against costly injector failure. This kit fits: Ford Ranger WEAT (3.0L 4cyl) 2007 – 2011 Ford Ranger WLAT (2.5L 4cyl)...

New genuine quality fuel rail pressure sensor 

Used for removal & re-fitting tank sender moulding rings Range: 75-160mm Diameter Use with a 24mm Spanner Socket

6 heavy duty wheels 1030mm x 440mm

FEATURES Ultra stable three wheel configuration Ergonomic shape Heavy duty HDPE shock proof body 3” twin axis sealed bearing control caster 7” dual bearing all-terrain wheels Built-in tool trays Soft Polyurethane headrest 2 Position ground clearance (Ultra Low & Off Road) Capacity: 225Kg (500...

The Garrett PowerMax™ turbocharger upgrade is compatible with 2011 – 2021 Ford Ranger PX1 PX2 PX3 | Everest and 2011-2020 Mazda BT50 3.2L Duratorq engines. This direct drop-in stage 1 upgrade will support up to 172kW*. The PowerMax™ CFD designed compressor wheel increases power...

This Garrett PowerMax direct fit turbocharger is designed for the 4.5L Toyota Land Cruiser 1VD-FTV V8 diesel engine platform found in the 2007-2018 Toyota Land Cruiser. The forged, fully machined compressor wheel designed for the G Series product line increases flow by 20% over...

 Garrett Direct Fit Upgrade Turbo Charger For Toyota Hilux 1KD-FTV 2005-2015   Aftermarket OEM Direct fit replacement GTX compressor wheel aerodynamics to improve 2-3% on transient response of vehicle and low-end torque Z-Bearing design with reduced oil flow and blow by reduction High grade turbine...

The Garrett GT2052V turbocharger is specifically designed for the Nissan Patrol GU Y61 models produced between 2000 and 2016. This turbocharger is compatible with the Nissan ZD30DDTI 3.0L direct injection engine. It corresponds to various OEM part numbers, including 14411VC100, 14411-VC100, 14411VC200, 14411-VC200, 144112X90A,...

Technical Documents: Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley. Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley. Thermally active tensile cords for maintenance-free performance...

Technical Documents: Premium EPDM rubber material Resistant to heat, oil and other chemicals Molded notch construction reduces bending and stresses Eliminates belt noise, reduces tension loss Superior belt stability helps performance Designed to meet or exceed all O.E specifications ABDS Tools Flyer TSB_015 Belt...

Offset blade for easy tappet clearance measuring 0.008, 0.010, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.019, 0.020, 0.025 & 0.026” blades Marked with equivalent metric sizes Offset blades 100mm long x 13mm wide with 25mm offset tip